In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks which you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it is actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so you get something which looks like a cone. The most important thing here is to be realistic with what type of paper plate that you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can make certain that nothing will leak once you put the mask on. Make sure that the edges are cut so the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you are done, so you don’t wind up with smudges or smears on your dog.
Then it is time to glue the mask on your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Be sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged firmly onto http://actionlaborrights.org/?p=33737 the face of your dog. Do not make the folds too big or else it might look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain that the ears are level and be sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask because your pet security, you’ll need to do some sanding to make sure that it’s safe on your dog. You can accomplish it by sanding off any excess paper that may have been removed from your mask.